Temperature sensor and low smoke halogen free flame retardant high temperature cable manufacturer:www.testeck.com/
|Place of Origin:||China|
|Model Number:||S series|
|Minimum Order Quantity:||10|
|Packaging Details:||Customized packing|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Supply Ability:||5000 pieces each month|
|Temperature Measuring Range:||-50～260℃||Wire System:||Three Wire System|
|Casing Pipe:||Non Magnetic Stainless Steel||Protective Device:||With Corrugated Pipe Protection|
|Response Time:||τ0.5＜15s||Name:||Spindle Seal Bearing Temperature Sensor|
Spindle Seal Bearing Temperature Sensor,
ferrule thread Bearing Temperature Sensor,
Spindle Seal bearing temp sensor
Spindle Seal Temperature Sensor Industrial Design Support Customization
For the temperature measurement of the spindle seal of the water turbine, it can realize the outgoing of single lines of the oil groove wall and the water tank wall without connection required. It can strengthen the stability of the temperature measurement. At the same time, it can be reliably sealed on the cable with a sealing grade of IP68,30 bar.
1. Product Introduction of the S series temperature sensor - spindle seal
The chip-type temperature sensing element adopts laser welding technology to prevent the solder joints from loosening or falling off in case of strong vibration, which effectively improves the stability of measurement.Movable ferrule connection mode is available. The wire does not need to rotate with the probe during installation, and the insertion depth of the probe can be adjusted appropriately.
When a single cable sealing bolt goes out, connection will not be required, and reliable sealing is realized at the same time.Oil and high temperature resistant shielded conductor, jacket and insulating layer are made of special polymers, which can work in the oil temperature of 100℃ for eight years. The copper-plated silver core has good conductivity, and the equilibrium degree of each hundred meters is less than 0.05Ω.
2. Product Parameter (Specification) of the S series temperature sensor - spindle seal
|Testeck temperature measurement thermal resistor of spindle seal S12Pt100-100-10-3131/F02B500|
|Temperature measuring range||-50～260℃|
|Wire system||Three wire system|
|Process connection||Movable ferrule thread G1 / 2 or other dimensions|
|Casing pipe||Non magnetic stainless steel|
|Outer diameter of casing pipe||Φ8,Φ10,Φ12|
|Protective device||With corrugated pipe protection|
|Insulation resistance at room temperature||>100MΩ|
|Outer diameter of corrugated pipe||Φ8.4|
3. Product Feature And Application of the S series temperature sensor - spindle seal
It is applied in monitoring the temperature of the spindle seal of the generator set of water turbine.
4. Product Details of the S series temperature sensor - spindle seal
The cable insulation layer is made of high-temperature and tension resistant materials.
In particular, magnetization resistance, temperature resistance and insulation performance shall be taken into consideration for packaging materials.
5. delivery, shipment and service of temperature sensors
The temperature sensor is packed in cartons. If you need, we can also make it for you.
1, are your manufacturer?
We are manufacturer, our factory localed in Shenzhen China.
2, what product you manufacturer have?
Our factory produce temperature sensor for power station,
Stators and cable for industry.
3, how many production lines do you have?
We have 10 production lines in Shenzhen factory.
4, how do you ensure product quality?
We already built a mechanical,electrical,fire and flame retardant laboratory, professional testing engineers.
5, can you send samples?
Yes, we will supply sample before your make the order.
Contact Person: ALix